BotBlue Day 2


Home \| StoreFront \| Project \| Inventory - for Sale \| on eBay \| Folding@Home \| BoT's HotLinks \| The Farm \| About Me \| Contact Me \|
Current Project Antec 300 Mod Raw Pics Inventory ATI RADEON HD2600 PRO Intel XEON DP 1.8 GHz Intel Pentium III 800 MHz Now on eBay Where You at!	Day 1 \| Day 2 \| Day 3 \| Day 4 \| Day 5 \| Day 6 \| Day 7 \| Raw Pics Day 2 - WC parts galour Some more parts arrived and I start with the preparation and moddification. New parts arrived: The Pump(s) : 1x Danger Den DD-CPX Pro - 1x Danger Den DD-CPX1 The Rad's: 1x XSPC RX360 1x XSPC RX120 Fittings: Blocks: I ordered a Swiftech GTZ and the D-Tek Fuzion V2. I was so excited about the GTZ that I put it right away and forgot to take pictures of it. Well here are some from the Fuzion which actually will go into another project. NB Waterblock by EK Waterblocks - EK-NB/SB 5 - Acetal The Case: Here are pictures of the case I will be using. It's been in my collection for a while and I think it has potential. It's not the usual case you would see used for Watercooling. It is a Maxtop CSF-800B. Prepping the board: Now I started prepping the mobo. I installed the 2x Enzotech MST-81 MosFet coolers and the EK NB block Before: After: Removed the Gigabyte cooling configuration to expose the Northbridge I shortened the screws that were included with the EK package because I did not want them to extrude to for out from the Motherboard. Installed the Northbridge Block Looking good so far and that completes Day 2.	News / Headlines Loading... Folding / Crunching
About Us \| Contact Us \| Members \| Webmail Access \| Site Map \| Help Copyright 2005 Codisha.com - All Rights Reserved. Designated materials and information are the property of their respective owners.


Home \| StoreFront \| Project \| Inventory - for Sale \| on eBay \| Folding@Home \| BoT's HotLinks \| The Farm \| About Me \| Contact Me \|
Current Project Antec 300 Mod Raw Pics Inventory ATI RADEON HD2600 PRO Intel XEON DP 1.8 GHz Intel Pentium III 800 MHz Now on eBay Where You at!	Day 1 \| Day 2 \| Day 3 \| Day 4 \| Day 5 \| Day 6 \| Day 7 \| Raw Pics Day 2 - WC parts galour Some more parts arrived and I start with the preparation and moddification. New parts arrived: The Pump(s) : 1x Danger Den DD-CPX Pro - 1x Danger Den DD-CPX1 The Rad's: 1x XSPC RX360 1x XSPC RX120 Fittings: Blocks: I ordered a Swiftech GTZ and the D-Tek Fuzion V2. I was so excited about the GTZ that I put it right away and forgot to take pictures of it. Well here are some from the Fuzion which actually will go into another project. NB Waterblock by EK Waterblocks - EK-NB/SB 5 - Acetal The Case: Here are pictures of the case I will be using. It's been in my collection for a while and I think it has potential. It's not the usual case you would see used for Watercooling. It is a Maxtop CSF-800B. Prepping the board: Now I started prepping the mobo. I installed the 2x Enzotech MST-81 MosFet coolers and the EK NB block Before: After: Removed the Gigabyte cooling configuration to expose the Northbridge I shortened the screws that were included with the EK package because I did not want them to extrude to for out from the Motherboard. Installed the Northbridge Block Looking good so far and that completes Day 2.	News / Headlines Loading... Folding / Crunching
About Us \| Contact Us \| Members \| Webmail Access \| Site Map \| Help Copyright 2005 Codisha.com - All Rights Reserved. Designated materials and information are the property of their respective owners.